LAURION Mineral Exploration Inc. has reported assay results from drill holes LBX26-118, LBX26-119 and LBX26-120, part of its 2026 Phase 1 diamond drilling program at the 100%-owned Ishkōday Gold and Polymetallic Project in Northwestern Ontario, about 220 km northeast of Thunder Bay and 28 km northeast of Beardmore. The company also disclosed that it increased its planned Phase 1 drilling from 3,865 metres to 5,605 metres across 22 drill holes, according to the NEWMEDIAWIRE announcement.
The expansion is being informed by SRK Consulting's independent structural gap analysis of the A-Zone, which identified five priority target areas where additional drilling may address gaps in the existing drill database. LAURION is using that framework, together with ongoing results, to prioritize near-term drilling as it seeks to validate its geological interpretation and support the evaluation of a potential maiden Mineral Resource Estimate. Readers can review the highlights of the assays for a consolidated view of the reported intervals.
The three holes are infill holes targeting the "zones for infill" defined by SRK in Zone 5 of the McLeod mineralized horizon, one of the five priority areas. Zone 5 is within the McLeod horizon, where wider spacing between historical drill holes has limited confidence in how mineralization connects. LBX26-119 was also stepped up-dip to further delineate the McLeod horizon, roughly halving the pierce-point distance from the company's 2022 drill holes.
President and CEO Cynthia Le Sueur-Aquin said all three holes intersected gold, silver and zinc mineralization at multiple levels. LBX26-120 delivered the best combination of width and grade in the group: 4.00 metres grading 1.163 g/t Au and 3.44 g/t Ag, including 1.70 metres at 2.131 g/t Au and 5.67 g/t Ag, with gold beginning at 15.30 metres down hole. LBX26-119 returned seven separate intervals grading 1 g/t Au or better, including 0.70 metres at 6.37 g/t Au and 6.00 g/t Ag, plus an 8.30-metre polymetallic interval and a zinc-rich zone grading up to 15.55% Zn over 0.50 metres. LBX26-118 returned 6.01 g/t Au within a 3.50-metre interval and, higher in the hole, 48.50 g/t Ag over 0.50 metres.
Detailed results are available for LBX26-118, which returned a silver-rich polymetallic interval at 109.30–110.30 m and a gold-zinc interval at 162.50–166.00 m; for LBX26-119, where a zinc-rich zone at 143.80–145.00 m sits 1.70 m below a 1.10 m interval grading 2.174 g/t Au; and for LBX26-120, which returned three intervals grading 1 g/t Au or better between 15.30 m and 139.00 m. A summary of drill holes is also posted. All core lengths are drilled thicknesses and true widths have not yet been determined.
The results matter because McLeod was one of five areas SRK identified as where closer drill spacing matters most. Le Sueur-Aquin said that with all three holes now reported, the geological team believes it has the data needed to model how the horizon is put together. That modelling underpins LAURION's stated objective of building technical clarity and scale before monetization, and its longer-term aim of positioning the 57 km² project for a potential future MRE. The company says additional targets, sequencing and timing remain subject to ongoing results and available financing. More information is available at http://www.LAURION.ca.

